SUSPENSION
108 URETHANE SUSPENSION KIT BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
109 URETHANE SUSPENSION KIT BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
110 URETHANE SUSPENSION KIT BUSHINGS ONLY, YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
20.34MM FRONT SWAY BAR BUSHING BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
22MM FRONT SWAY BAR BUSHING BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
20.34MM FRONT SWAY BAR BUSHING URETHANE SUSPENSION KIT (EARLY) BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
22 MM FRONT SWAY BAR BUSHING URETHANE SUSPENSION KIT (LATE) BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
22MM FRONT SWAY BAR 112 URETHANE SUSPENSION KIT (LATE) BUSHINGS ONLY YOU WILL NEED TO USE YOUR EXISTING HARDWARE
IDLER ARM REPAIR KIT from Early 280SL W113 Chow in pic for reference FITS ALL 280SLs FROM CHASSIS # 000019 EXCEPT FOR 000091 & 000108. Is also used on the following chassis 107 108 109 111 113 114 115 116 123 126
It is the inner control arm seal rings for 1950’s to 1970’s cars. Priced Each. There are 8 per CarArticle code: v.nr. 1203330180
NOT AVAILABLE AT THIS TIME.Article code: v.nr.1103300118
EXCHANGE REBUILT BOX ASSY. WILL FIT ALL 6 CYL MODELS. 4.5 V-8s AVAILABLE UPON SPECIAL REQUEST 3.5 MODELS ARE NOT AVAILABLE. PLEASE PROVIDE VEHICLE I.D. NUMBER IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT.
URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 8 8 8 8 8 8
RUBBER FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm 2 2 early 2 late Front sway bar to frame - 23.85mm 2 2 late Front sway bar to frame - 20.34mm 2 2 early 2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.
ORIGINAL BILSTEIN, 2 PER CARArticle code: v.nr.1093200030
ORIGINAL BILSTEIN, 2 PER CARArticle code: v.nr.1083200131
ORIGINAL BILSTEIN, 2 PER CARArticle code: v.nr.1093200031