108 109 110 111 Chassis(1960-1972)

Article code: v.nr.1103521065

Article code: v.nr.1073300103

COMES WITH MASTER LINK 450SL/SLC WITH M117.982 & 985 ALL 560SL WITH M117.967 ALLArticle code: v.nr.0009977694

FULL TOOL SET AND STORAGE POUCH AS PER ORIGINAL.Article code: v.nr.1235800103

TRANSMISSION FILTER KIT 108 109 111 114 115 722 Chassis

ALL METAL FILTER APPROXIMATELY 5.50 IN DIAMETER. WILL COME WITH PAN GASKET AND PLUG SEALS. FITS ALL 230SLs AND 250SLs WITH TRANS. # UP TO 006749 AND THEN WITH TRANS. # FROM 009936 UP TO 023010. AFTER THIS, USE KIT # 27-2010. W108/109/110/111/113

INJECTION POINT SET MOUNTED IN SIDE OF DISTRIBUTOR BODY. W/O WIRE CABLE. 450SL/SLC W/M117.982 UP TO 016343.

6 NEEDED PER WHEELArticle code: v.nr.1134010628

Article code: v.nr.1117585002

Article code: v.nr.1087500077

Article code: v.nr.1107500377

Article code: v.nr.1117505077

FOR 111 CHASSIS COUPES & CONVERTBLES ONLY. WILL NOT FIT 111 SEDANS.Article code: v.nr.1117585158

Article code: v.nr.1117508077

AMBER COLOR LENSArticle code: v.nr.1118260790

This is a new cover under the dashboard (left), new and original packed Coupe / Cabriolet W 111 / W 112 220se,250se,280se,300se 111-112 2 door coupe and convertibles 1962-1968Currently no longer available at Mercedes

This is a new cover under the dashboard (right), new and original packed Coupe / Cabriolet W 111 / W 112 220se,250se,280se,300se 111-112 2 door coupe and convertibles 1962-1968Currently no longer available at Mercedes

Article code: v.nr.1103300018

Article code: v.nr.1103300218

MAIN LINK ROD ONLYArticle code: v.nr.1203330030

Article code: v.nr.1112680834

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL SOLD EACH 190SL PONTON 8 8

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL SOLD EACH 8 Needed per Car  

URETHANE FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL   W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm        2 2 early 2 late Front sway bar to frame - 23.85mm   2     2 late    Front sway bar to frame - 20.34mm     2 2 early   2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first.   Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler.   With Calipers  With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.