BOSCH REBUILT STARTERArticle code: v.nr.002151710188

STUD

TACHOMETER CABLE ALL 113 MODELS RHD W/1950MM Length

THREADED PLUG  Crankcase M42 X 1.5  Fits many Different Models 117 Shown in picture Be sure to check via MB 1179970230 

  THRUST PIECE (THRUST,OIL PUMP) Fits All Mercedes-Benz SL W113 Models from 1963 to 1971

1960-71 3.5mm Thick 15mm Wide Valve Adjustment Shim  

3.5mm thickness. ROUND DISC WITH SLOTTED CENTER USED FOR VALVE ADJUSTMENT. FITS ALL 113s UP TO 280SL WITH ENG. # 10-005464 & 12-009136. 12 PER CAR.

3.5mm THICKNESS. ROUND SHIM WITH SLOTTED CENTER USED FOR VALVE ADJUSTMENT. FOR 280SLs FROM ENG. # 10-005465 & 12-009137. 12 PER CAR.

4.5mm THICKNESS. ROUND DISC WITH SLOTTED CENTER USED FOR VALVE ADJUSTMENT. FOR 280SL FROM ENG.# 10-005465 & 12-009137. 12 PER CAR.Article code: v.nr.1300530353

4.5mm THICKNESS. ROUND DISC WITH SLOTTED CENTER USED AS VALVE ADJUSTEMENT SHIM. 12 PER CAR FOR ALL 230SL, 250SL, & 280SL UP TO ENG. # 10-005464 & 12-009136.Article code: v.nr.1800531952

BUSHING MOUNTED BEHIND TIMING GEAR # 05-2011.Article code: v.nr.6150520150

VALVE COVER TUBE - PLASTIC 230SL — Chassis 113.042       1963 - 1966 Base Convertible 2.3L L6 250SE — Chassis 111.023       1966 - 1967 Base Convertible 2.5L L6 250SE — Chassis 108/111       1966 - 1967 Base Coupe 2.5L L6 250SL — Chassis 113.043       1967 Base Convertible 2.5L L6 280SE — Chassis 108/111       1968 - 1969 Base All 2.8L L6

BRASS OR COPPER GUIDE IN CYLIDER HEAD FOR INTAKE VALVE. STANDARD SIZE 14X9X55. 6 PER CAR.Article code: v.nr.1300500024

BRASS OR COPPER GUIDE IN CYLINDER HEAD FOR INTAKE VALVES. REPAIR SIZE OF +.001 OVER STANDARD 14mm O.D. LARGER REPAIR SIZES ARE AVAILABLE UPON SPECIAL REQUEST.Article code: v.nr.1300500124

Article code: v.nr.1210500624

Article code: v.nr.1210501624

BRASS OR COPPER GUIDE IN CYLIDER HEAD FOR INTAKE VALVE. STANDARD SIZE 14X9X55. 6 PER CAR.

HALF MOON SHAPED COLLET TO RETAIN INTAKE & EXHAUST VALVE AT TOP SHAFT POINT OF VALVE. FOR 250 & 280SL, 2 PER VALVE, 24 PER CAR. WILL NOT FIT 230SL.Article code: v.nr.1150530026

HALF MOON SHAPED COLLET TO RETAIN INTAKE & EXHAUST VALVES AT TOP SHAFT SIDE OF VALVE. 230SL ONLY, 2 PER VALVE, 24 PER CAR.Article code: v.nr.1800530627

FOR 230SL ONLY.Article code: v.nr.1275860105

FOR 230SL ENGINES WITH 24mm DIAMETER WRIST PINS. CHECK CLOSELY AS SOME 230SL ENGINES WERE MODIFIED TO HAVE 25mm WRIST PINS.Article code: v.nr.1270380050

FOR 230 & 250SLs WITH 25mm WRIST PINS. CHECK CLOSELY AS MANY 230SL ENGINES ORIGINALLY HAD 24mm WRIST PINS.

FOR 280SL ENGINES ONLY, 25mm DIAMETER. WILL NOT FIT 230 & 250SL ENGINES.Article code: v.nr.1300380150